Configure D-Link Router In Windows Device and Firmware Update

February 19, 2018

People wondering for configuring the D-Link router in to your computer system then they no need to worry any more because below given is the solution to your problem, which is as follows, and in case you want any kind of help from D-Link then call the ‘Toll free number’ of the D-Link company, which is totally free.

Steps to Configure D-Link Router In Windows Device

Step 1: First of all turn on your computer system, but not the router and the modem.

Step 2: Make connection among your computer, router, and modem.

Step 3: Connect the router and computer with the help of ethernet wired cable network with the proper connection set up.

Step 4: Now you can turn on the router and also the router modem with the help of power plug.

Step 5: As you connect to a computer with the router then ‘set up D-Link router’ will be installed in the background, and after that just wait for a moment as it will take few minutes to install in your computer system.

Step 6: Now when the installation process is over, then just launch any one of the web browsers in your system.

Step 7: In the search space bar, enter as the address which is present on the top of the web browser page. And in case you have any doubt regarding the IP address then contact to ‘D-Link router support number’ they will assist you in that.

Step 8: Provide the required username of your choice and setup password for the same.

Step 9: After that just click on the next option and proceed to the next step.

Step 10: Click on the save option after when you have done with your registering process.

Step 11: After that, your set up is configuring in the background.

Step 12: When finishing with all that procedure you have successfully installed the D-Link router in your computer system.

Now hoping that all your problem regarding the installation of the D-Link router has been sort out. And in case if not then contact to the ‘D-Link router technical support number’

Steps to update your D-Link router firmware

Follow the below-given steps to solve your problem:-

Step 1: First of all enter the D-Link router on the space provided by the search engine.

Step 2: Enter the IP address of the D-Link router as, then D-Link router page will open.

Step 3: Make a login to your account by entering the required password in the space provided.

Step 4: Now move to the ‘utilities’ option present in the navigation panel.

Step 5: From there click on the ‘Firmware Update’.

Step 6: Now locate your firmware file saved me your computer system.

Step 7: Choose your firmware file and then click on the open option.

Step 8: Now just click on the update option.

Step 9: Then it will prompt you to upgrade, then just click on the ok button.

Step 10: Once the upgrade is done then it will take few minutes to respond.

Step 11: Finally click on the ‘done’ button when your router has stopped rebooting the system.

As hence above given steps are provided for the common support from there side. And if in case you are still in any doubt then kindly contact to the ‘Helpline number’ Which has been offered by them. As this service also available 24/7 hours in a day.

Leave a comment